Qoute Form
REQUEST FOR QUOTATION SPECIFICATION SHEET
TYPE OF EQUIPMENT
Press Feeding Equipment:
Air Feed
Servo Feed
Straightener = Powered
Straightener = Non-Powered
Reel (
Powered
Non-Powered )
Coil Cradle
Pallet Decoiler
Cut to length machine:
Air CTL
Servo CTL
MATERIAL INFORMATION:
Maximum Stock Width
X
Thick
Minimum Stock Width
X
Thick
Stock Thickness:Min
Max
Most Common Feed Length
Maximum Feed Length
Minimum Feed Length
Maximum Coil Weight
Maximum Coil Outside Diameter
Range of Coil Inside Diameters
Type of Stock:
Hot Rolled
Cold Rolled
HSLA...(Clarify)
Stainless
Aluminum
Galvanized
Tensile
KPSI
Yield
KPSI
Low Carbon Mild Steel
Other
Surface Condition:
Standard Mill Finish
Polished
Painted
Other
PRESS & DIE INFORMATION:
Type of Press:
Straight Side
OBI
Gap Frame
Mechanical W/Air Clutch
Full Revolution
Hydraulic
Pneumatic
Press Strokes Per Minute:
Fixed
Variable Range
to
Feed Line Height
What portion of your press cycle/crank
angle is available for feeding material
into the die?
degrees.
Will press be running continuously when possible?
Yes
No
Are dies to be:
Single Station
Progressive
Other
Will the dies be using pilot pins for positioning?
Yes
No
Will part removal delay new feed cycle?
Yes
No
Will a stock oiler system be required?
Yes
No
Incoming Power Supply Available:
110V/1PH
220V/1PH
220V/3PH
440V/3PH
Other
Any Additional Comments?
Name
Company Name
Address
City, State, Zip
Phone
Fax
E-Mail
(REQUIRED)